1. Home
  2. Car Kits and Dash Mounts
  3. DashMounts
  4. PanaVise 08-10 Infiniti QX56 Nissan Armada InDash Mount

PanaVise 08-10 Infiniti QX56 Nissan Armada InDash Mount

0 Review(s) Write a Review
Your Price: $25.38
Retail Price:$32.95
Your Savings:$7.57(23%)

Brand New PanaVise Custom InDash Mount for the 2008-2010 Infiniti QX56 & Nissan Armada

Model #: 751311108

The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below.

Compatible Car:

  • 2008-2010 Infiniti QX56
  • 2008-2010 Nissan Armada
  • Mounting Instructions:

    Hardware Include: (1)A-#8x9/16"Needle Pt. Screw

    Mounting Location: Right Side of Radio

    Tools Required: Flat Dash Tool, Hook Tool, Phillips Screwdriver, 8mm Socket Driver

    Step# 01
    With hook tool remove power outlets at bottom of climate control with cubby and Aux. In plug, by pulling it out to release (5) clips.

    Step# 02
    There are (4) 8mm Phillips screws that hold the radio in place behind the radio cavity. (2) lower and up close, and (2) up and back beside radio.

    Step# 03
    Pull out large bezel with radio, air vents, and climate control, starting at the bottom releasing a total of (12) clips. Carefully set it aside.

    Step# 04
    Remove (1) 8mm Phillips lower right side radio bracket screw form center of radio cavity. Place mount over hole, and set flush to dash cavity side and replace screw. Install the (1) supplied (A) screw into the hole on the mount.

    If we don't have it listed please email us.

    Part Number: 751311108
    Availability: NEW
    Feature: 113

    Brand New PanaVise Custom InDash Mount for the 2008-2010 Infiniti QX56 & Nissan Armada

    Model #: 751311108

    The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below.

    Compatible Car:

  • 2008-2010 Infiniti QX56
  • 2008-2010 Nissan Armada
  • Mounting Instructions:

    Hardware Include: (1)A-#8x9/16"Needle Pt. Screw

    Mounting Location: Right Side of Radio

    Tools Required: Flat Dash Tool, Hook Tool, Phillips Screwdriver, 8mm Socket Driver

    Step# 01
    With hook tool remove power outlets at bottom of climate control with cubby and Aux. In plug, by pulling it out to release (5) clips.

    Step# 02
    There are (4) 8mm Phillips screws that hold the radio in place behind the radio cavity. (2) lower and up close, and (2) up and back beside radio.

    Step# 03
    Pull out large bezel with radio, air vents, and climate control, starting at the bottom releasing a total of (12) clips. Carefully set it aside.

    Step# 04
    Remove (1) 8mm Phillips lower right side radio bracket screw form center of radio cavity. Place mount over hole, and set flush to dash cavity side and replace screw. Install the (1) supplied (A) screw into the hole on the mount.

    If we don't have it listed please email us.

    Related Items