1. Home
  2. Car Kits and Dash Mounts
  3. Panavise
  4. PanaVise InDash Mount for MB Smart Car Four Two 2008-11

PanaVise InDash Mount for MB Smart Car Four Two 2008-11

0 Review(s) Write a Review
Your Price: $29.95
Retail Price:$32.95
Your Savings:$3.00(9%)

PanaVise Custom InDash Mount for the Smart Car

Model #: 75150-109

The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below.

Compatible Car:

  • 2009 Smart Car FourTwo

Mounting Instructions:

  • Mounting Location: Below Switches
  • Tools Required: Dash Tool, Hook Tool, T-20 torx Driver

STEP #1: With your hands and dash tool assist pull of the switch plate with the emergency light switch etc, releasing (2) clips. Set aside.

STEP #2: With T-20 Torx, remove (3) screws to the Left and Right side of switch plate cavity, and (1) screw behind the large square hole. Pull out the dash panel, and slide the mount in behind the dash, between the dash and the radio. The Large Square hole should match up with the square hole on the dash. And the mount face plate will stick out and down from the switch assembly.

STEP #3: Install the screw behind the square hole and the other (2) screws. Replace the switch assembly.

If we don't have it listed please email us.

Part Number: 75150-109
Availability: NEW

PanaVise Custom InDash Mount for the Smart Car

Model #: 75150-109

The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below.

Compatible Car:

  • 2009 Smart Car FourTwo

Mounting Instructions:

  • Mounting Location: Below Switches
  • Tools Required: Dash Tool, Hook Tool, T-20 torx Driver

STEP #1: With your hands and dash tool assist pull of the switch plate with the emergency light switch etc, releasing (2) clips. Set aside.

STEP #2: With T-20 Torx, remove (3) screws to the Left and Right side of switch plate cavity, and (1) screw behind the large square hole. Pull out the dash panel, and slide the mount in behind the dash, between the dash and the radio. The Large Square hole should match up with the square hole on the dash. And the mount face plate will stick out and down from the switch assembly.

STEP #3: Install the screw behind the square hole and the other (2) screws. Replace the switch assembly.

If we don't have it listed please email us.

Related Items